The new generation of turbodiesel engines (since 2005) is fitted with piezo injectors. Compared with electromagnetic ones, they offer three times the speed and precision, with nine bullet-fast and precise injection pulses per working cycle.
Piezo injectors work on the principle of a crystal that expands under electric voltage and thereby activates the injector. They have an optimised design with fewer components. Some are very sensitive...
The piezo element, an integral part of the injector body, responds to a high-voltage signal from the ECU (130 V) with a changed wavelength (20-30 μm) and, at lightning speed, enables several precise high-pressure injections of diesel fuel (300-1800 bar). However, due to high pressure, improper maintenance and impurities in the fuel, this type often develops leakage into the return line because of wear of the injector's hydraulic control valve.
Poor sealing of the injectors, caused by worn contact surfaces, results in uncontrolled fuel leaking into the cylinders and blue smoke after prolonged idling. The cause is wear and damage of the sealing surfaces due to high pressures and impurities. This results in difficult engine starting or a sudden loss of power during more aggressive acceleration. There is a risk of uncontrolled fuel leaking into the cylinders due to damage to the sealing surface on the injector insert, which can damage and burn through the pistons.
The repair, or remanufacturing, consists of disassembly and ultrasonic cleaning of all components, microscope inspection and identification of the damage. Microscopic inspection is necessary to determine the degree of damage to the sealing surfaces and to assess whether they can be restored. The final stage of a professionally performed repair is calibration and testing according to the test protocol, on a test bench. After the repair, which we do for 40 percent of the price of a new part, the injectors are as good as new.
To arrange Piezo injector repair contact us via the form below, Send an enquiry, by phone on: +385 1 2995 244 or by e-mail: servis@pinjusic.hr
Send an enquiry